Fusebox Cover

Fusebox Gallery 1

Step 1 2

Your fuse box could be located under a cupboard under the stairs or in your kitchen.

Find your fuse box

Fusebox Step Switch Off

Then turn off all of the individual switches.

Turn the main switch off

Step3

Then turn on all of the individual switches. If one of the switches automatically turns off again that normally means there’s a problem in a certain area of your property. To get the power back on you'll need to unplug the appliance and then turn the switches on again. If that doesn't work you should speak to a qualified electrician or the manufacturer of the appliance.

Turn the main switch on

Initial Checks

Meter Cover

Step1 Meter

Your electricity meter might be located in a cupboard under the stairs or outside on a wall.

Find your electricity meter

Step2 Meter

If it is then this normally indicates that there is power coming into the property. If you’re on a prepayment meter it could be that you need to add more credit or you could have a fault in your property. If you own your property then you need to speak to your electricity supplier or a qualified electrician. If you don’t own the property you need to speak to your landlord or housing association.

Check if your electricity meter is showing lights, movement or display.

Smartmeter

We might be able to help restore your power with two simple checks.

Report a power cut

Please treat electricity cables as live, stay away and call us immediately 24 hours a day on
<a href="tel:08003163105" aria-label="0800 31 63 105">0800 31 63 105</a>*

Call

Please report this immediately

A dangerous situation could be an electricity cable hanging low, an exposed electricity cable in the ground, or equipment that is sparking or on fire. It could be anything else that you consider dangerous.

Danger1x3

Danger2x3

Danger3x3

Do you think you're in a dangerous situation?

If you see electricity lines that are down or causing significant risk to the public please call
<a href="tel:999" aria-label="In case of an emergency please dial 999">999</a>

Emergency

Report power cut

Report a power cut 

While you were reporting your power cut, we have identified a wider issue in your area. We're investigating this but in the meantime&nbsp;you can find more information&nbsp;by following our power cut updates.&nbsp;We won’t&nbsp;need to visit your property to restore the power.

We've become aware of a power cut affecting your area

Unfortunately, we may have to access inside your property to fix the power cut. If you are not available today or tomorrow please call us to arrange a more suitable time.

We have completed some checks on your smart meter and can confirm that you are still receiving power to your property. If you have a prepayment meter please check your credit, otherwise please contact your electricity supplier (the company you pay your electricity bills to), who will be able to help you further.
&nbsp;
Not sure who your electricity supplier is? If you live in London, the South East and East of England we can help by telling you who the current electricity supplier is for your address.&nbsp;<a href="/ukpn/help/who-is-my-electricity-supplier-and-what-is-my-mpan/" title="Who is my electricity supplier and what is my MPAN">Find your supplier.</a>

We have checked your electricity supply

There is an electricity supply to your meter

Want to report a powercut for a different address?

<div>
<div>Thank you for your enquiry</div>
</div>

If your address and meter number cannot be found, please complete the short form below so our team can help find your electricity supplier and MPAN details.

Can't find address?
Please call us free 24 hours a day on <a href="tel:0800 316 3105">0800 316 3105</a><a href="tel:0800 316 3105" title="0800 316 3105"></a> and we'll be happy to help you.

We are unable to find your address

Analytics cookies collect data in a combined way that is anonymised and summarised to help us understand how our website is being used to improve your experience.

Analytics

We will only use your personal details to respond to your feedback. We will not contact you for marketing purposes and your details will be managed in accordance with the requirements of the Data Protection Act 1998.

Please try another city or town, or <a href="https://www.powercut105.com/en/" title="Visit the Power Cut 105 website">visit the Power Cut 105 website</a> to find your local distributor.

We’re unable to find this location

Cookies

One last step

We’re carrying out planned work in your area. We’ll do our best to cause as little disruption to you as possible, and we’ll make every effort to finish the work as quickly as we can. Occasionally, there may be times when we might have to postpone the work. You can check our website for the latest updates:

Please enter a valid UK mobile number.

Please give us a call on 0800 31 63 105 and we'll be more than happy to help.

Sorry, we’re unable to offer you text message updates for the postcode you have entered.

We were unable to add your number to receive future alerts. Please give us a call on 0800 31 63 105 and we'll be more than happy to help.

You're all signed up to receive messages for your current power cut.

We were unable to add your number to receive future alerts.

Just enter the information below and we will email you the details

The form has errors outstanding. Please check all fields.

Get future text message updates from our team

We've also saved your details and we'll text you in future if there's a power cut in your area.

Thanks

<div>UK Power Networks (Operations) Limited standard terms for carrying out connections work can be found at <a rel="noopener" href="https://www.ukpowernetworks.co.uk/internet/en/our-services/public-highway/Connection%20T&amp;Cs%20Sept2016%20v7.pdf" target="_blank">Connection and Diversionary Works Terms and Conditions</a> or obtained by request in writing to Head of Connections Services, Highway Services, Disconnections, General Enquiries and Smart Metering, UK Power Networks (Operations) Limited, 5, York Way, Borehamwood, Hertfordshire, WD6 1DJ. These Terms and Conditions will be the basis for any work carried out following this request.</div>

Example help text from RTE dictionary item

We’re sorry we’re having trouble getting these details for you. Our team will be able to help, please send us the address you tried searching. We’ll get back to you within the next 10 days.
If you’re not the bill payer, you can continue to fill in this form but you'll need to <a rel="noopener" href="mailto:mbx-mpasenquiry@ukpowernetworks.co.uk" target="_blank">send us a letter of authority</a> from the bill payer or building owner authorising us to provide this information. We do not accept management agreements or account information correspondence. Alternatively, we can send a letter to the property marked for the bill payer's attention confirming the details.

We’ll be in contact within the next 10 working days.

Thank you for your enquiry

Address or meter number not found

We use third party cookies to help make recommendations on products or services that we believe are relevant to you and your interests. This may be in the form of advertisements on our website and on other websites that you visit on any of your devices where you have accepted marketing cookies. If you disable these, you will still see these recommendations and adverts, but they will not be specifically tailored to you and your interests.

Marketing

We are unable to find your meter number

Please check you’ve entered your address correctly. If you are still experiencing issues please email us with your details to MPAS@ukpowernetworks.co.uk or call us on 0800 029 4283 and we’ll be happy to help. Remember, we can only help you if you live in London, the South East or East of England.

Sorry, we still can’t find the electricity supplier for the address you’ve given

We've emailed your details to %EMAIL%. Please check your spam/junk folder in case you haven't received it.

Title is limited to eight characters

Necessary cookies enable core functionality. Our website cannot function properly without these cookies, and they can only be disabled by changing your browser preferences (please note if disabled our website may not work or show correctly on your device).

Necessary Cookies

Our engineers are addressing the cause of the fault and how best to repair it.
 
We will update you with an estimated restoration time as soon as we know more.

We use necessary cookies to make our website work. You can only disable these by changing the settings in your browser, but this may affect how our website functions or displays on your device. We also use additional cookies. These help us to enhance your experience, for example, to personalise content, remember your preferences and improve our services. To make detailed changes to these, you can manage your preferences in the cookie settings.

We use necessary cookies to make our website work. You can only disable these by changing the settings in your browser, but this may affect how our website functions or displays on your device.

We also use additional cookies. These help us to enhance your experience, for example, to personalise content, remember your preferences and improve our services.

To make detailed changes to these, you can manage your preferences in the cookie settings.

Your data We are committed to protecting and respecting your privacy. The information you provide will not be used for marketing purposes. We will not sell or pass on your information to any other third party for any purpose. For more information on how we will treat your personal data, please read our <a rel="noopener" href="https://www.ukpowernetworks.co.uk/privacy-policy" target="_blank" title="View our Privacy Policy">Privacy Policy</a>.

<div>
<div>Please enter a postcode and choose an address</div>
</div>

<div>
<div>Please enter a valid UK mobile number</div>
</div>

We offer a wide range of tailored support options, all for free if you are signed up to our Priority Services Register.

Need extra support or additional care during a power cut?

<div>
<div>We're carrying out a planned power cut in your area. For our engineers to carry it out safely they need to turn the power off. We're doing this work as it's essential to provide reliable electricity supplies to your area. We're sorry for any inconvenience caused and thank you for your patience.</div>
</div>

Reason for the planned power cut

You will get:
<ul>
<li>Reminders and updates about this work including any delays or cancellations</li>
<li>Choose free items to support you during your power cut such as a £5 coffee voucher</li>
<li>Alerts about power cuts or planned power cuts that might affect you in the future</li>
</ul>

We've finished our planned power cut work.

If you don't have a postcode yet (e.g for new build properties), please provide the nearest postcode.

Check if you have a power cut or outage in [place] using the online power cut checker from UK Power Networks today.

Not all customers in the area will be without power.

Report a power cut

Power Cut Check for [place] | UK Power Networks

We can send you updates and reminders about this planned power cut and other power cuts that might affect your area in the future.

Receive power cut updates from our team

Please enter a valid UK mobile phone number with no spaces or symbols

We are investigating reports of a power cut and more information will appear here shortly, so keep checking for updates. We are sorry for any disruption this may be causing you

We are receiving reports from other customers about a power cut in your area

* Indicates required fields

This planned power cut has now finished. Thank you for your patience and cooperation whilst we carried out essential work on the electricity network which helps power the community and keep local businesses running.

How the planned power cut went

<div>
<div>We have finished our planned power cut work.</div>
</div>

If you need this application form in large font, EasyRead or Braille, please call <a href="tel:08001699970">0800 169 9970</a> or email us at <a href="mailto:psr@ukpowernetworks.co.uk">psr@ukpowernetworks.co.uk</a>.
You can also download this application form in different formats and languages on our <a href="/ukpn/power-cut/priority-services/resources-and-downloads/" title="Resources and downloads">resources page</a>.

The Priority Services Register is free to join. It helps us to look after customers who have specific communication, access or safety needs. If you live in London, the South East or the East of England, we can offer extra support when you need it, for example if you experience a power cut. To be added to our Priority Services Register, please complete our short form below.
If you would like to receive a copy of our Priority Services Register application form in large font, in EasyRead, or in Braille, please call <a href="tel:08001699970">0800 169 9970</a> or email us at <a href="mailto:psr@ukpowernetworks.co.uk">psr@ukpowernetworks.co.uk</a> and we’ll be happy to arrange this for you. You can also download our EasyRead form and language forms from our <a rel="noopener" href="https://www.ukpowernetworks.co.uk/power-cut/priority-services/resources-and-downloads" target="_blank">Priority Services resources and downloads web page</a>.
For more information on how we will treat your personal data, please read our <a rel="noopener" href="https://www.ukpowernetworks.co.uk/privacy-policy" target="_blank">Privacy Policy</a> and our <a rel="noopener" href="https://www.ukpowernetworks.co.uk/power-cut/priority-services/psr-promise-and-keeping-your-data-safe" target="_blank">Priority Services Promise</a>.

Please use the file upload section below to upload supporting documents including: Schematic diagram for the proposed scheme:*
Details of your export limiting scheme such as G100 type test reference or electricity storage manufacturer’s statement of compliance:*
<a rel="noopener" href="https://www.energynetworks.org/industry-hub/resource-library/?search=EREC+G100" target="_blank" title="Go to the Energy Networks Associations website to view more information about EREC G100" data-anchor="?search=EREC+G100">View more information regarding EREC G100</a>.
G98 type verification test report:*
Need help finding your type verification test reports? <a rel="noopener" href="https://www.ena-eng.org/ProductTypeTestRegister/Product.aspx" target="_blank" title="Go to the Energy Networks Association's website to view the ENA Type Test Verification Report Register">Enter details here</a>.
Additional Attachments:
Computer print out (where possible) or other schedule of protection settings;
Electricity meter(s) make and model;
Datasheets of inverter and other installed equipment
* Mandatory items

Your data We are committed to protecting and respecting your privacy. The information you provide will not be used for marketing purposes but we work with two research organisations, Rant &amp; Rave and Explain Research who may contact you for feedback about our service. Your feedback is shared with us and Ofgem, our regulator. We will not sell or pass on your information to any other third party for any purpose. For more information on how we will treat your personal data, please read our <a rel="noopener" href="https://www.ukpowernetworks.co.uk/privacy-policy" target="_blank" title="View our Privacy Policy">Privacy Policy</a>.
<div id="submitButton" class="enqfieldvalueend"></div>

<div class="intro__icon-box">You should not proceed with this application. Your proposed installation falls under EREC G98. Your installer is required to advise us of the intention to use the electricity storage device no later than 28 days (inclusive of the day of commissioning), after the electricity storage device is commissioned. <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources" target="_blank" title="Go to our Distribution Energy Resources webpage">View more information</a>.</div>

<div class="intro__icon-box">You should not proceed with this application. If the rated capacity of your installation is 50kW or less (three phase) or 17kW or less (single phase) and you are using EREC G99 type tested inverters please follow the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre3" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre3">G99 simple process</a>. If your installation is not eligible for the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre3" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre3">G99 simple process</a> please follow the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre4" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre4">G99 standard process</a>. To determine whether your inverters are EREC G99 type tested please visit the <a rel="noopener" href="http://www.ena-eng.org/ProductTypeTestRegister/Product.aspx" target="_blank" title="Go to the Energy Networks Association's website to view the ENA Type Test Verification Report Register">ENA Type Test Verification Report Register</a>.</div>

<div class="intro__icon-box">You should not proceed with this application. Your proposed installation falls under EREC G98. Your installer is required to advise us of the intention to use the electricity storage device no later than 28 days (inclusive of the day of commissioning), after the electricity storage device is commissioned. <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources" target="_blank" title="Go to our Distribution Energy Resources webpage">View more information</a>.</div>

<div class="intro__icon-box">You should not proceed with this application. If your Distributed Energy Resources (DER) will not be connected via EREC G98 type tested inverters please follow the relevant process as described below:</div>
<ul>
<li>If your Distributed Energy Resources (DER) will be connected via EREC G99 type tested inverters and the rated capacity of your installation is 50kW or less (three phase) or 17kW or less (single phase) please follow the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre3" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre3">G99 simple process</a>. To determine whether your inverters are EREC G99 type tested please visit the <a rel="noopener" href="http://www.ena-eng.org/ProductTypeTestRegister/Product.aspx" target="_blank" title="Go to the Energy Networks Association's website to view the ENA Type Test Verification Report Register">ENA Type Test Verification Report Register</a>.</li>
<li>For all non-type tested inverters please follow the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre4" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre4">G99 standard process</a>.</li>
</ul>

<a rel="noopener" href="https://www.energynetworks.org/industry-hub/resource-library/" target="_blank" title="View more information regarding EREC G100">View more</a> information regarding EREC G100.

<div class="intro__icon-box">You should not proceed with this application. If the export capacity of your installation will not be limited to maximum of 16A per phase you need to follow either the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre3" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre3">G99 simple process</a> or the <a rel="noopener" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre4" target="_blank" title="Go to our Distribution Energy Resources webpage" data-anchor="#pre4">G99 standard process</a> depending on the rated capacity of your installation.</div>

To determine whether your inverters are EREC G98 type tested please visit the <a rel="noopener" href="http://www.ena-eng.org/ProductTypeTestRegister/Product.aspx" target="_blank" title="Go to the Energy Networks Association's website to view the ENA Type Test Verification Report Register">ENA Type Test Verification Report Register</a>.

You should not proceed with this application. If your installation does not comply with the emission limits of Stages 1 or 2 of IEC Technical Report 61000-3-4 you will need to ensure compliance prior to being offered a connection to the distribution network.

<a rel="noopener" href="http://www.dcode.org.uk/assets/images/ENA_ER_G5_Issue_4_Amendment_1_(2005).pdf" target="_blank" title="View more information on emission limits and EREC G5/4-1">View more</a> information on emission limits and EREC G5/4-1.

<div class="p-rich_text_section intro__icon-box">You should not proceed with this application.</div>
<div class="p-rich_text_section"> Our G99 fast track process is only available for single premises connections. </div>
<div class="p-rich_text_section">For multiple premises please follow the relevant process as described below:</div>
<div class="p-rich_text_section"></div>
<ul class="p-rich_text_list p-rich_text_list__bullet" data-stringify-type="unordered-list" data-indent="0" data-border="false" data-border-radius-top-cap="false" data-border-radius-bottom-cap="false">
<li data-stringify-indent="0" data-stringify-border="0">If the rated capacity of your installation is 11.04kW or less (three phase) at 400V or 3.68kW or less (single phase) at 230V please follow the <a rel="noopener" tabindex="-1" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre2" target="_blank" title="Go to our Distribution Energy Resources webpage" class="c-link" data-stringify-link="https://www.ukpowernetworks.co.uk/internet/en/our-services/list-of-services/electricity-generation/distributed-generation-connection/#pre2" data-sk="tooltip_parent" data-remove-tab-index="true" data-anchor="#pre2">G98 multiple premises connections process</a>.</li>
<li data-stringify-indent="0" data-stringify-border="0">If the rated capacity of your installation is 50kW or less (three phase) or 17kW or less (single phase) please follow the <a rel="noopener" tabindex="-1" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre3" target="_blank" title="Go to our Distribution Energy Resources webpage" class="c-link" data-stringify-link="https://www.ukpowernetworks.co.uk/internet/en/our-services/list-of-services/electricity-generation/distributed-generation-connection/#pre3" data-sk="tooltip_parent" data-remove-tab-index="true" data-anchor="#pre3">G99 simple process</a>.</li>
<li data-stringify-indent="0" data-stringify-border="0">If your installation is not eligible for either of the above please follow the <a rel="noopener" tabindex="-1" href="https://www.ukpowernetworks.co.uk/electricity/distribution-energy-resources#pre4" target="_blank" title="Go to our Distribution Energy Resources webpage" class="c-link" data-stringify-link="https://www.ukpowernetworks.co.uk/internet/en/our-services/list-of-services/electricity-generation/distributed-generation-connection/#pre4" data-sk="tooltip_parent" data-remove-tab-index="true" data-anchor="#pre4">G99 standard process</a>.</li>
</ul>

By making this application you understand and agree to the Terms and Conditions that:
<ul>
<li>You must install and operate the electricity storage and generation units exactly as described in the application form and in accordance with the EREC G98, EREC G100 and EREC G5/4-1;</li>
<li>If UK Power Networks has reason to believe that the electricity storage and generation units have been installed or are being operated otherwise than exactly as described in the application form and in accordance with the EREC G98, EREC G100 and EREC G5/4-1 it may de-energise the connection and require that witness tests are undertaken in its presence and/or that the customer undertakes such remedial works as it shall deem appropriate; and</li>
<li>The customer shall bear its own and UK Power Networks’ costs associated with any witness tests and / or remedial works that UK Power Networks may require to be carried out if it has reason to believe that the electricity storage and generation units have been installed, or are being operated, otherwise than exactly as described in the application form and in accordance with the EREC G98, EREC G100 and EREC G5/4-1.</li>
</ul>

Please be aware that you are required to provide the commissioning sheets on the day after the planned commissioning date. The contact details of the relevant team will be included in the confirmation email you will receive within 10 working days after submitting the application.
Note: Your planned commissioning date must be at least 10 working days from the date of application, but not more than 3 months in advance as our connection offers are only valid for 3 months.

Can't find address?
Drop a pin on our map to share your location

Thanks, we'll start to send you text updates about this power cut shortly

Thanks, we'll start sending you text updates shortly. We'll also use your details to text you about any future power cuts which we become aware of that may affect you.

Thank you for signing up. We will keep you updated if there are any large power cuts affecting your address.

We've saved your details and we'll text you in the future if there's a power cut in your area.

Sorry, we’re unable to offer you text message updates for the postcode you have entered. Please call us free 24 hours a day on <a href="tel:08003163105" title="0800 316 3105">0800 316 3105</a> and we’ll be happy to help you.

Register for text updates failure

We were unable to add your number to receive future alerts. Please give us a call on <a href="tel:08003163105">0800 31 63 105</a> and we'll be more than happy to help.

You're all signed up to received messages for your current power cut

We are committed to protecting and respecting your privacy. The information you provide will not be used for marketing purposes but we work with two research organisations, Rant &amp; Rave and Explain Research who may contact you for feedback about our service. Your feedback is shared with us and Ofgem, our regulator. We will not sell or pass on your information to any other third party for any purpose. For more information on how we will treat your personal data, please read our <a href="/ukpn/privacy-policy/" title="Privacy Policy">privacy policy</a>.

During a power cut we can text you updates and give you an estimated time that your power will be back on. We can also let you know when there's a large power cut in your area.
Please enter your details below.

<ul>
<li>We will not send you marketing messages, only updates about this power cut.</li>
<li>This service is free, however, your network may charge you if you're outside of the UK. Standard text fees will apply for messages that you send to us.</li>
<li>You can stop receiving text messages at any time by texting STOP.</li>
</ul>

Get free text updates

We can text you to let you know when we're aware of a future power cut affecting your area.
To sign up for future text message alerts, enter the postcode and select the property you would like to receive a text message for.

Sometimes we may have to access inside your property to fix the power cut. In case this is needed, please specify at least a four hour period when you will be home.

<ul>
<li>Must be at least 10 characters long</li>
</ul>

Update from the team

<div>UK Power Networks (Operations) Limited standard terms for carrying out connections work can be found at <a rel="noopener" href="https://www.ukpowernetworks.co.uk/-/media/files/highways-services/unmetered-supply-agreements-and-tcs/tscsumc.ashx?la=en&amp;hash=50260ACB6474296B46F41CBEF9FF64F2B0B4A184" target="_blank">Connection and Diversionary Works Terms and Conditions</a> or obtained by request in writing to Head of Connections Services, Highway Services, Disconnections, General Enquiries and Smart Metering, UK Power Networks (Operations) Limited, 5, York Way, Borehamwood, Hertfordshire, WD6 1DJ. These Terms and Conditions will be the basis for any work carried out following this request.</div>

<div>
<div>Share with neighbours, friends and family who may also be affected.</div>
</div>

<div>
<div>Help others who may be affected</div>
</div>

<div>
<div>Please enter a valid UK mobile phone number with no spaces or symbols</div>
</div>